Loading... Please wait...

NRF5340-PDK

Hover over image to zoom

  • Image 1
  • Image 2
Nordic
AU$80.50
SKU:
NRF5340-PDK
Shipping:
Calculated at checkout
Current Stock:
2

 Product Description

Preview development kit for the nRF5340, a dual processor SoC supporting Bluetooth 5.1, Bluetooth mesh, NFC, Thread & Zigbee

The nRF5340 PDK is the preview development kit for the nRF5340 SoC, containing everything needed to get started with development, on a single board.

The PDK supports development with an extensive range of wireless protocols. It supports Bluetooth Low Energy and all Bluetooth 5 features, including Long Range, 2 Mbps and Advertising Extensions. Mesh protocols like Bluetooth mesh, Thread and Zigbee can be run concurrently with Bluetooth LE, enabling smartphones to provision, commission, configure and control mesh nodes. NFC, ANT, 802.15.4 and 2.4 GHz proprietary protocols are also supported.

The PDK is bundled with an NFC antenna that quickly enables testing of nRF5340’s NFC-A tag peripheral. A SEGGER J-Link debugger is on the board, enabling full-blown programming and debugging, of both the nRF5340 SoC and external targets.

All analog and digital interfaces, and GPIOs are available via headers and edge connectors. The kit is Arduino Uno Rev3 hardware compatible, meaning it can be easily interfaced with external device shields, including Nordic's Power Profiler Kit.

Four buttons and four LEDs simplify input and output to and from the nRF5340 SoC, they are all user-programmable. An on-board external memory is connected to the 96 MHz QSPI peripheral in the nRF5340 SoC.

The PDK is typically powered with USB, but can be powered by a wide range of sources, within the supply range of 1.7 to 5.0 V. In addition to USB, it can be powered with external source, but also includes a CR2032 battery holder and a Li-Po battery connector, for in-field testing. Power source is selected with the "nRF power source" switch. Current consumption can be measured by using the dedicated current measurement pins.

 

nrf.jpg

 

Features:

  • Versatile preview development kit for nRF5340 SoC
  • Arduino Rev3 compatible
  • 2.4 GHz and NFC antennas
  • SWF RF connector for direct RF measurements
  • User-programmable LEDs(4) and buttons(4)
  • SEGGER J-Link OB programmer/debugger
  • Pins for measuring power consumption
  • 1.7-5.0 V supply from USB, external, Li-Po battery or CR2032 coin cell battery

 

nRF5340 SoC:

  • High-performance application processor
    • 128/64 MHz Arm Cortex-M33 with FPU & DSP instructions
    • 1 MB Flash + 512 KB RAM y 8 KB 2-way set associative cache
  • Fully programmable, ultra-low-power network processor
    • 64 MHz Arm® Cortex®-M33 with 2 KB instruction cache
    • 256 KB Flash and 64 KB RAM
  • Trusted execution with Arm TrustZone®
  • Root-of-trust with Arm CryptoCell-312
  • Ultra-low-power 2.4 GHz multiprotocol radio
    • Bluetooth 5.1 Direction Finding capable
    • Bluetooth 5 Long Range
    • Bluetooth mesh, Thread and Zigbee
  • NFC
  • Full range of digital interfaces with EasyDMA
    • 12 Mbps full-speed USB
    • 96 MHz encrypted QSPI for external memory
    • 32 MHz high speed SPI for displays and fast sensors
    • 3xSPI, 3xTWI, 3xUART, I2S, PDM, 3xPWM, QDEC
  • 12-bit 200 ksps ADC
  • 105 °C extended operating temperature
  • 1.7-5.5 V supply voltage range

 

Applications: 

  • Professional lighting
  • Industrial
  • Advanced wearables
  • Medical
  • Smart Home
  • Asset tracking and RTLS

 

 

Documents

icon-pdf2.gif nRF5340 Website

icon-pdf2.gif nRF5340 Product Brief

icon-pdf2.gif nRF5340 Documentation

 Find Similar Products by Tag

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

What's News

newsletter

Copyright 2020 Glyn Store. All Rights Reserved.
| Sitemap |

Click the button below to add the NRF5340-PDK to your wish list.