Loading... Please wait...

FTDI FT2232HL Hi-speed USB 2.0 Slave to Dual UART/FIFO Converter IC (64-pin LQFP)

Hover over image to zoom

  • Image 1
  • Image 2
FTDI
US$3.93
SKU:
FT2232HL-REEL
Condition:
New
Availability:
Contact sales@glyn.com.au for delivery leadtime if quantity to be ordered is greater than our stock
Shipping:
Free Shipping
Minimum Purchase:
1000 unit(s)
Current Stock:
Out of stock

Sorry but this item is currently unavailable. Please check back at a later stage.

 Product Description

Part Number 
Description
FT2232HL Hi-speed USB 2.0 Slave to Dual UART/FIFO Converter IC, 64-pin LQFP 

 We are an official distributor for FTDI.

http://www.ftdichip.com/SalesNetwork/AsiaPacific.htm#Australia-New Zealand 

This stock is ours, in our warehouse and  is guaranteed as brand new in factory original vaccuum packed and boxed. We can send photos of any part showing datecode and we have the stock!

 


The FT2232H is FTDI’s 5th generation of USB devices. The FT2232H is a USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces.

Building on the innovative features of the FT2232, the FT2232H has two multi-protocol synchronous serial engines (MPSSEs) which allow for communication using JTAG, I2C and SPI on two channels simultaneously.

The FT2232H is available in Pb-free (RoHS compliant) 64-pin LQFP (FT2232HL) and QFN (FT2232HQ) packages.


Key Hardware Features

  • Single chip USB to dual serial / parallel ports with a variety of configurations
  • Entire USB protocol handled on the chip. No USB specific firmware programming required
  • USB 2.0 High Speed (480Mbits/second) and Full Speed (12Mbits/second) compatible
  • Dual Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI or bit-bang) design
  • Dual independent UART or FIFO ports configurable using MPSSEs
  • Independent Baud rate generators
  • RS232/RS422/RS485 UART Transfer Data Rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter)
  • USB to parallel FIFO transfer data rate up to 10Mbyte/sec
  • Single channel synchronous FIFO mode for transfers > 25 Mbytes/sec
  • CPU-style FIFO interface mode simplifies CPU interface design
  • MCU host bus emulation mode configuration option
  • Fast Opto-Isolated serial interface option
  • FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases
  • Adjustable receive buffer timeout
  • Option for transmit and receive LED drive signals on each channel
  • Enhanced bit-bang Mode interface option with RD# and WR# strobes
  • FT245B-style FIFO interface option with bidirectional data bus and simple 4 wire handshake interface
  • Highly integrated design includes +1.8V LDO regulator for VCORE, integrated POR function and on chip clock multiplier PLL (12MHz – 480MHz)
  • Asynchronous serial UART interface option with full hardware handshaking and modem interface signals
  • Fully assisted hardware or X-On / X-Off software handshaking
  • UART Interface supports 7/8 bit data, 1/2 stop bits, and Odd/Even/Mark/Space/No Parity
  • Auto-transmit enable control for RS485 serial applications using TXDEN pin
  • Operational configuration mode and USB Description strings configurable in external EEPROM over the USB interface
  • Configurable I/O drive strength (4,8,12 or 16mA) and slew rate
  • Low operating and USB suspend current
  • Supports bus powered, self powered and high-power bus powered USB configurations
  • UHCI/OHCI/EHCI host controller compatible
  • USB Bulk data transfer mode (512 byte packets in Hi-Speed mode)
  • +1.8V (chip core) and +3.3V I/O interfacing (+5V Tolerant)
  • Extended -40°C to 85°C industrial operating temperature range
  • Compact 64-LD Lead Free LQFP or LQFN package
  • +3.3V single supply operating voltage range


Application Areas

  • Single chip USB to dual channel UART (RS232, RS422 or RS485)
  • Single chip USB to dual channel FIFO
  • Single chip USB to dual channel JTAG
  • Single chip USB to dual channel SPI
  • Single chip USB to dual channel I2C
  • Single chip USB to dual channel Bit-Bang
  • Single chip USB to dual combination of any of above interfaces
  • Single chip USB to Fast Serial Optic Interface
  • Single chip USB to CPU target interface (as memory), double and independent
  • Single chip USB to Host Bus Emulation (as CPU)
  • USB Audio and Low Bandwidth Video data transfer
  • PDA to USB data transfer
  • USB Smart Card Readers
  • USB Instrumentation
  • USB Industrial Control
  • USB MP3 Player Interface
  • USB FLASH Card Reader / Writers
  • Set Top Box PC - USB interface
  • USB Digital Camera Interface
  • USB Bar Code Readers

 

icon-pdf2.gif FT2232H Datasheet

 

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

newsletter

Copyright 2018 Glyn Store. All Rights Reserved.
Sitemap | BigCommerce Premium Themes by PSDCenter

Click the button below to add the FTDI FT2232HL Hi-speed USB 2.0 Slave to Dual UART/FIFO Converter IC (64-pin LQFP) to your wish list.