The evaluation kit enables quick evaluation of RF performance and range, power consumption and serial to Wi-Fi firmware. The evaluation kits include:
Several options of 802.11b soldered down module are available offering a choice of antennas and power amplifiers.
In addition to serial to Wi-Fi functionalities, binaries for temperature and light sensing applications are included to demonstrate capabilities to build sensor applications with GainSpan Wi-Fi modules and software.
The Serial-to-Wi-Fi Evaluation Kit offers a quick and easy way for customers to evaluate the capabilities of GainSpan's GS1011 ultra-low power wireless system-on-a-chip and the Serial-to-Wi-Fi embedded software for Wi-Fi networks. The Serial-to-Wi-Fi embedded software enables faster time-to-market for new or legacy products that need to add Wi-Fi to their designs.
The Serial to Wi-Fi Evaluation Kit provides all the hardware and software necessary to quickly set up a serial (UART) based link to a PC or external microcontroller. In order to evaluate the ease of adding secure Wi-Fi communications to a product using GainSpan's AT command set, the kit includes all the software tools necessary for configuration of Serial-to-Wi-Fi and GS1011 modules, data transfer using "AT" command-set and protocol analyzer for validation of packet & frame fields.
The Serial to Wi-Fi Evaluation Kit enables GainSpan customers to develop software on their existing microcontrollers to support the "AT" command set, and connect it to the serial interface on the evaluation kit reference board.
The evaluation kits ship with serial-to-Wi-Fi binary pre-loaded. Additional binaries are included in the kit to download to the module for evaluating other features and capabilities such as Wi-Fi protected Setup (WPS), Enterprise Security (EAP), RF Testing and Temperature and Light Sensing (TLS).The Serial to Wi-Fi Evaluation Kit provides all the hardware and software necessary to quickly set up a serial (UART) based link to a PC or external microcontroller. In order to evaluate the ease of adding secure Wi-Fi communications to a product using GainSpan's AT command set, the kit includes all the software tools necessary for configuration of Serial-to-Wi-Fi and GS1011 modules, data transfer using "AT" command-set and protocol analyzer for validation of packet & frame fields.
GainSpan Wi-Fi iPhone App
Allows an iPhone or iPod Touch To Work with the GS1011 TLS Kit
This Application allows an iPhone or iPod Touch to work with the GS1011 TLS Kit from GainSpan. From the iPhone you can view the Temperature, Light, Voltage, or Relative Signal Strength of a particular TLS Node.
The GainSpan nodes populate the configuration page with their MAC IDs. PLEASE NOTE - All nodes must be pre-configured to operate with the iPhone SNMP stack. The TLS hardware has been delivered to your facility and must be used with this application over Wi-Fi.
Nodes connected to the network are populated into the configuration page with their MAC addresses displayed. The application allows the user to select a particular node from the list. Once selected, the tab bar along the bottom displays the sensor light, temperature, battery voltage or relative signal strength information updated periodically from the node. Shine a light on the TLS board and the light bulb will get brighter and display the LUMS value.
The configuration page allows the user to Get/Set different parameters associated with the TLS board – like the Update Value or the SSID.
By selecting a different MAC from the discovered nodes list, the sensor information associated with that particular node will then be displayed.
The GS1011 TLS Kit is also the GS1011MxP Evaluation Kit referred to in the section above with the following part numbers: GS1011MIP-EVK-S2W-WEB and GS1011MEP-EVK-S2W-WEB.
Choose a currency below to display product prices in the selected currency.