Loading... Please wait...

GainSpan GS2011MIx Low-Power 802.11b/g/n Wi-Fi Module - Up to 72Mbps

Hover over image to zoom

  • Image 1
  • Image 2
GainSpan
US$31.38
Availability:
Contact sales@glyn.com.au for delivery leadtime if quantity to be ordered is greater than our stock
Shipping:
Calculated at checkout

 Product Description

The GS2011M module provides a quick, easy, and cost effective way for device and appliance manufacturers to add Wi-Fi connectivity to their products. The module provides a high speed serial interface connection to an embedded design built on an 8/16/32-bit microcontroller, achieving up to 40 Mbps throughput over an SDIO interface.

The GS2011M is an ideal solution for organizations with limited Wi- Fi or RF expertise or for those seeking faster time to market, as it reduces RF design time and removes the burden of testing and certification. The module is IEEE 802.11b/g/n compliant, and meets worldwide regulatory and Wi-Fi Alliance certification requirements.

The module includes two analog to digital converter (ADC) pins for connecting energy measurement and other sensors. It runs the full Wi-Fi and TCP/IP networking stacks on module, completely offloading the host microcontroller. The module supports a complete suite of security protocols, also without tasking the host microcontroller, including WPA/WPA2-Enteprise and Personal security modes, legacy WEP encryption, and upper layer security protocols such as TLS/SS and HTTPs. Alternatively, it can be run self-contained without a host.

For ease of provisioning, the module can be set up simply and easily from a smartphone or laptop through the innovative Limited AP mode or with Wi-Fi Protected Setup (WPS). 

The GS2011M has extended range with industry leading receiver sensitivity and is available with a u.FL connector to add an external antenna for max performance or a ceramic chip antenna for performance and convenience while saving space. US/Canada (FCC /IC), Europe (ETSI) and Japan (TELEC) certified.

products-gs2011m-moduleblockdiagram-xl.jpg

Features & Benefits

  • Adds low power, high speed Wi-Fi and Internet connectivity to any device with a microcontroller and serial host interface
  • Certified module reduces development time, testing and certification, accelerating time to market
  • Easy upgrade path: footprint and pin compatible to GS1011M and GS1500M modules
  • Full offload solution minimizes load on host processor
  • Easy smartphone provisioning with Limited AP or Wi-Fi Protected Setup (WPS)
  • Ultra low power consumption through dynamic power management modes (Standby, Sleep, Deep Sleep)
  • Extended range
  • IEEE 802.11 b/g/n connectivity with PHY rates up to 72 Mbps
  • UART, SPI, SDIO interface to microcontroller
  • Throughput (typical)
    • 40 Mbps on SDIO
    • 30 Mbps on SPI (master)
    • 12 Mbps on SPI (slave)
    • 1 Mbps on UART
  • Extensive networking stack and services
  • Security
    • 802.11i
    • WPA/2–Personal and Enterprise
    • Legacy WEP
    • TLS
  • Power source:
    • 3.3V main supply
    • 1.8V, 3.3V I/O
    • 1.6V to 3.6V Battery
  • Certification: FCC, IC, ETSI, TELEC, Wi-Fi
  • I/O interfaces : SPI, UART, SDIO, I2C, I2S, GPIO, ADC

 

Part Number Description
GS2011MIE Low power module with external antenna (U.FL)
GS2011MIZ Low power module with ceramic antenna

 

Documentations

 

Specifications

SpecificationGS1011
Dual-Core Processors Two 32-bit ARM7 CPU @44MHz
1 for applications (APP) : 1 dedicated to radio (WLAN)
On Board Memory RAM 128KBytes , FLASH 384KBytes, ROM 80KBytes
Radio (Data Rates) 802.11 (Wi-Fi) b/g compatible
Rates Supported: 11, 5.5, 2 and 1 Mbps (CCK/QPSK/BPSK Modulation)
Security 802.11i (WPA2 - PSK, WPA, WEP), Authentication, AES Encryption
RF Power 9dbm typical (estimate)
Range 50-70M Indoor, 200-300M+ Outdoor (Typical Estimate)
Operating Temp Range -40 to +85 °C industrial temp
Location Awareness RSSI
Software Protocol Support TCP/IP, UDP, SNMP, RTOS
*Standby State
with RTC
1- 5uA depends on voltage on RTC *lowest power state
Package 10 x 10 x 0.85 mm; 102-pin dual row QFN; RoHS compliant
Pin and Package compatible with GS1010
I/Os UART (2), I2C, SPI (2), ADC (2), PWM (3), GPIO (32)

 Find Similar Products by Tag

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

newsletter

Copyright 2017 Glyn Store. All Rights Reserved.
Sitemap | BigCommerce Premium Themes by PSDCenter

Click the button below to add the GainSpan GS2011MIx Low-Power 802.11b/g/n Wi-Fi Module - Up to 72Mbps to your wish list.