JN5139 ZigBee Module, High Transmit Power with SMA Connector

Not recommended for new designs, use JN5148 products

The JN5139-xxx-Myy family is a range of surface mount modules that enables users to implement systems using our own JenNet networking stack or IEEE802.15.4 with minimum time to market and at the lowest cost.  They remove the need for expensive and lengthy development of custom RF board designs and test suites. The modules use our JN5139 wireless microcontroller to provide a comprehensive solution with high radio performance and all RF components are included.  All that is required to develop and manufacture wireless control or sensing products is to connect a power supply and peripherals such as switches, actuators and sensors, considerably simplifying product development.

Three basic hardware module variants are available: JN5139-xxx-M00 with an integrated antenna, JN5139-xxx-M01/M03 with an antenna connector and JN5139-xxx-M02/M04 with a power amplifier and LNA for extended range.

Features: Module (JN5139-Z01-M02R1)

• 2.4GHz IEEE802.15.4 compliant
• 2.7-3.6V operation
• Sleep current (with active sleep timer) 2.6µA
• Temperature range (-20 to +70°C)
• Lead-free and RoHS compliant
• up to 4km range
• has SMA connector
• Receiver sensitivity -100dBm
• TX power +19dBm
• TX current 125mA
• RX current 45mA
• 18x41mm

Features: Microcontroller (JN5139)

• 16MHz 32-bit RISC CPU
• 96kB RAM, 192kB ROM
• 4-input 12-bit ADC, 2 11-bit DACs, 2 comparators, temperature sensor
• 2 Application timer/counters,
  3 system timers
• 2 UARTs (one for in-system debug)
• SPI port with 5 selects
• 2-wire serial interface
• 21 GPIO
• Evaluation kits available with full, unlimited, Software Development Kit

Benefits

• Microminiature module solutions
• Ready to use in products
• Minimises product development time
• No RF test required for systems
• Compliant with FCC part 15 rules, ETSI ETS 300-328 and Japan ARIB STD-T66
• Production volumes supplied pre-programmed with application software

Applications

• Robust and secure low power wireless applications
• Wireless sensor networks, particularly IEEE802.15.4 / JenNet systems
• Home and commercial building automation
• Home networks
• Toys and gaming peripherals
• Industrial systems
• Telemetry and utilities (e.g. AMR)

Documentations

• JN5139 Module Datasheet
• JN5139 Wireless Microcontroller Datasheet