Currency Displayed in
Used for programming the GS2011Mxx Wi-Fi modules.
The GainSpan GS2011M and GS2100M single-site flash programmers allow users to program GainSpan Wi-Fi modules based on the GS2000 SoC, one at a time. Users can select and load the WLAN and APP firmware binaries. The single-site programmer kit includes programmer hardware and software application/GUI to select and load firmware binaries into the module.
The programmer hardware includes a single site flash programming board with a Wi-Fi module socket and a USB connector through which the programming software can access the module and program it.
Documentations
Specification | GS1011 |
---|---|
Dual-Core Processors | Two 32-bit ARM7 CPU @44MHz 1 for applications (APP) : 1 dedicated to radio (WLAN) |
On Board Memory | RAM 128KBytes , FLASH 384KBytes, ROM 80KBytes |
Radio (Data Rates) | 802.11 (Wi-Fi) b/g compatible Rates Supported: 11, 5.5, 2 and 1 Mbps (CCK/QPSK/BPSK Modulation) |
Security | 802.11i (WPA2 - PSK, WPA, WEP), Authentication, AES Encryption |
RF Power | 9dbm typical (estimate) |
Range | 50-70M Indoor, 200-300M+ Outdoor (Typical Estimate) |
Operating Temp Range | -40 to +85 °C industrial temp |
Location Awareness | RSSI |
Software Protocol Support | TCP/IP, UDP, SNMP, RTOS |
*Standby State with RTC | 1- 5uA depends on voltage on RTC *lowest power state |
Package | 10 x 10 x 0.85 mm; 102-pin dual row QFN; RoHS compliant Pin and Package compatible with GS1010 |
I/Os | UART (2), I2C, SPI (2), ADC (2), PWM (3), GPIO (32) |