FTDI VM800B 4.3" TFT Display Development Platform with Black Bezel

The VM800B development modules offer a hi-quality display system in an elegantly designed, form-fitted bezel that provides a fitted display and component board in a rugged, plastic enclosure. Offered in black or pearl colors, this display sub-system provides the engineer a low priced option which can shorten development time while enabling a production finished look. These FTDI Basic modules are designed to control 3.5”, 4.3” or 5” TFT displays.

Included in the module is a speaker for audio output and a 0.1” pitch connector socket for interfacing to the SPI interface of the system host MCU. There are 5 power configuration methods including a mini-USB socket and a 2 pin DC connector. 
 

A complete listing of technical documentation is provided below. Due to the size of the documents and Sample Application software environment, FTDI Chip recommends that purchasers of a VM800B development system first acquaint themselves with the DS_VM800B and DS_FT800 datasheets, after which familiarity with EVE's pseudo language found in the Programming Guide is advised. The remaining documents and Sample Application software have been developed with an orientation toward system and design implementation.

Note

To evaluate and connect the VM800B to a PC, you will also need to order the FTDI USB-MPSSE cable which is available for purchase here.

Documentations

 EVE Brochure 
 VM800B Datasheet
 FT800 Datasheet
 FT800 Programmers Guide
 FT800 Sample Application
 AN_240 FT800 From the Ground Up
 AN_245 VM800CB_SampleApp_PC_Introduction
 AN_246 VM800CB_SampleApp_Arduino_Introduction
 AN_252 FT800 Audio Primer
Design Examples