Loading... Please wait...

MP2722 Evaluation Board

Hover over image to zoom

  • Image 1
Monolithic Power Systems
AU$50.00
SKU:
EV2722-RH-00A
Condition:
New
Shipping:
Calculated at checkout
Minimum Purchase:
1 unit(s)
This product is available for pre-order only

 Product Description

 

The EV2722-RH-00A is an evaluation board designed to demonstrate the capabilities of the MP2722, a highly integrated, 5A, switch-mode battery management device for a single-cell Li-ion or Li-polymer batteries. The narrow-voltage DC (NVDC) power management structure provides a low-impedance power path, which optimizes charging efficiency, reduces battery charging time, and extends battery life during discharging.

The MP2722 is fully compliant with USB Type-C 1.3 and supports dual-role port (DRP) functionality, as well as Try.SNK and Try.SRC mode. USB Battery Charging Specification 1.2 (BC 1.2) and non-standard adapter detection are also supported by the input source type identification algorithm.

The serial interface offers complete operating control, charging parameter configuration, and status/interrupt monitoring. The MP2722 supports a fully customizable JEITA profile with configurable temperature windows and actions. It is available in a QFN-22 (2.5mmx3.5mm) package.

The EV2722-RH-00A supports input sources up to 16V, including standard USB host ports and high-voltage wall adapters with fast charge capability. The EV2722-RH-00A supports boost mode and USB On-The-Go (OTG) operation by supplying a voltage between 5V and 5.35V at the IN pin, with up to 3A of current.

 

Datasheet

 

 

Features & Benefits of MP2722

  • USB Type-C 1.3 Compliant
  • Fully Integrated CC Controller with Dual-Role Port (DRP) Mode and Autonomous or Manual Mode
  • Try.SNK and Try.SRC Mode Support
  • Supports USB BC 1.2 and Non-Standard Adapters
  • 26V Sustainable Input Voltage (VIN)
  • Configurable 80mA to 5A Charge Current (ICC) via the Serial Interface
  • Configurable 100mA to 3.2A Input Current Limit (IIN_LIM) via the Serial Interface
  • Minimum VIN Loop for Maximum Adapter Power Tracking
  • Comprehensive Safety Features:
    • Fully Customizable JEITA Profile
    • Additional Negative Temperature Coefficient (NTC) Thermistor Input
    • Configurable Die Temperature Regulation from 60°C to 120°C
    • Complete Charge and Pre-Charge Safety Timers
    • Watchdog Safety Timer
    • Lockable Registers for Charging Parameters
  • Configurable 750kHz to 1.5MHz Switching Frequency (fSW)
  • Integrated 15mΩ Low On Resistance (RDS(ON)) Battery MOSFET with Shipping Mode and Reset Mode
  • Ultra-Low 8.5μA Battery Discharge Current in Shipping Mode
  • Down to 30mA Termination Current Settings for Wearable Applications
  • Serial Interface Port for Flexible System Parameter Setting and Status Reporting
  • Configurable Boost Converter for Source Mode and USB On-The-Go (OTG):
    • Configurable Output Current (IOUT) Limit Loop Up to 3A
    • Output Over-Current Protection (OCP)
    • Ability to Power Large Capacitive Loads Up to 2mF
    • Configurable 5V to 5.35V Output Voltage (VOUT)
  • Accuracy:
    • ±0.5% Battery Regulation Voltage (VBATT_REG)
    • ±5% ICC
    • ±5% IIN_LIM
    • Remote Battery Sensing for Fast Charge
    • ±2% Output Regulation in Boost Mode
  • Available in a Small QFN-22 (2.5mmx3.5mm) Package

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

What's News

newsletter

Follow us on

Copyright 2024 Glyn Store. All Rights Reserved.
| Sitemap |


Click the button below to add the MP2722 Evaluation Board to your wish list.